OPERATING CONDITIONS OF ROLLING BEARINGS IN AGRICULTURAL MACHINERY, THEIR CAUSES OF FAILURE AND CONSEQUENCES
Authors
Shaabidov Sharaxmat Askarovich, Mirzayev Kaxromon Karshibayevich, Mamasobirov Umid Mamazokirovich
Share
Annotation
This article presents an analytical overview of the operating conditions of rolling bearings used in agricultural machinery, along with the causes and consequences of their failure. One of the main reasons for the failure of rolling bearings is fatigue-induced flaking and wear of the friction surfaces. Key contributing factors include external load effects on rolling surfaces; deformation of the rolling surface that increases localized contact stresses; internal defects of bearing components; reduction in surface hardness due to elevated temperatures from external heat sources; and corrosion of the rolling surfaces.
Keywords
Authors
Shaabidov Sharaxmat Askarovich, Mirzayev Kaxromon Karshibayevich, Mamasobirov Umid Mamazokirovich
Share
References:
1. Ivanov M.N. Machine parts: A textbook for engineering specialties of universities/ M.N.Ivanov, V.A.Finogenov. 12th ed. ispr. –M.: Higher School, 2008. -408 p.
2. Timofeev S.I. Machine parts/S.I.Timofeev. –2nd ed. –Rostov n/A: Phoenix, 2007. -409 p.
3. Lelikov O.P. Shafts and bearings with rolling bearings/O.P. Lelikov. Construction and calculation. Reference book. Moscow: Mashinostroenie, 2006. – 640 p.
4. Reshetov D.N. Machine parts: A textbook for students of mechanical engineering and mechanical specialties of universities/ D.N. Reshetov - 4th ed., reprint. and add. - M.: Mechanical Engineering, 1989. - 496 p.
5. Shoobidov Sh.A. Mashina detallari: darslik/Sh.A.Shoobidov. –T.: “Asian Book House” nashriyoti, 2020. -381 b.
6. Chichinadze A.V., Brown E.D., Boucher N.A. and others. Fundamentals of tribology (friction, wear, lubrication): textbook for technical universities. 2nd ed. pererabot, dop. / under the general editorship of A.V.Chichinadze. - M.: Mashinostroenie, 2001. - 664 p.
7. Skvortsov V.F. Fundamentals of mechanical engineering technology: a textbook.Skvortsov; Tomsk Polytechnic University. Tomsk: Publishing House of Tomsk Polytechnic University, 2012. 352 p.
8. Suslov A.G. Technological support and increasing the durability of friction surfaces of machine parts/ A.G. Suslov. Actual problems of tribology.: Collection of tr. international scientific and technical conf. (Samara, June. 2007). Moscow: Mashinostroenie Publ., 2007, T-2. pp. 373-380.
9. Fedonin O.N. Engineering the surface of a part from the perspective of its corrosion resistance// Surface engineering. The directory application. Engineering Journal/ O.N. Fedonin. Moscow, 2001, No. 10, pp. 17-19.
10. Shets S.P. Increasing the wear resistance of bearing friction units of machines and mechanisms. Diss. ...Doctor of technical Sciences . – Bryansk, 2011. - 312 p.
11. Kogaev V.P., Drozdov Yu.N. Strength and wear resistance of machine parts: Textbook for machine tools. spec. vuzov. - M.: Higher School, 1991. - 319 p.
12. Kuzmin V.A. Rolling bearings for passenger front-wheel drive vehicles /V.A. Kuzmin, S.A. Kulagin - Automotive industry. Moscow, 1990, No. 12, pp. 7-11.
13. Fadin Yu.A. Determination of wear of friction units during their operation/ Yu.A. Falin, O.F. Kireenko //Bulletin of Mechanical Engineering. -Moscow, 2004. -No. 3.-pp. 27-32.
14. Chermenskiy O.N., Fedotov N.N. Rolling bearings: A reference book. -M.: Mashinostroenie, 2003. -576 p.
15. Gorokhovsky G.A. On the mechanism of brining the working surfaces of rolling bearings/ G.A. Gorokhovsky //Friction and wear. Belarus: Gomel, 1999. Vol. 20. -No. 5. pp.545 - 549.
16. Seregin A.A. Damage analysis of rolling elements of ball bearings [Text] / A.A. Seregin, S.P. Psyukalo, A.V. Sklyar // International Technical and Economic Journal. -Moscow, 2010. -No. 3. – pp.85-88.
17. Mirzaev K.K., Irgashev A. Wear resistance of rolling-ball bearings operating in an abrasive medium. USA. Journal of Friction and Wear Vol. 35, No.5, pp. 439-442. Allerton Press 2014.
18. Shoobidov Sh.A., Irgashev A., Mirzaev K.K. Dumalash bearing books elementlaring eyilishi zharaenida ishtirok etuvchi abrasive zarrachalaring shlchamini baolash.//Toshdtu Habarlari. –Toshkent, 2006. -No. 3. 65-71 b.
19. Shoobidov S.A., Mirzaev K.K. Bearing elementlaring eyilish tezligini baolash. “Zamonaviy ishlab chikarishning is samaradorligi va energo-resurs tejamkorligini oshirish muammolari” mavzushidagi Khalkaro ilmiy-amaliy anjuman. Andijon. 3-4 October 2018 yil. 265-270 b.
20. Shaabidov Sh.A., Nigmatullaev S.I. Improving the efficiency of bevel gearboxes by technological and constructive methods: monograph. Tashkent: Tashstu, 2006. 205 p.
21. Garkunov D.N. Tribotechnics (wear and tear): Textbook. – 4th ed. reprint. and additional – M.: "Publishing House of the Ministry of Agriculture", 2001. 616 p.
22. Zangiev A.A., Skorokhodov A.N. Practicum on the operation of a machine and tractor fleet. Moscow: KolosS, 2006. 320 p.
23. Mirzaev K.K., Shoobidov S.A. Dumalashiniklari eyilishbardoshligini oshirish. Monograph. –T.: “Innovation rivojlanish nashriyot-matbaa uyi" 2022. – 128 b.
24. Shaabidov Sh.A., Irgashev A., Mirzaev K.K. Improving the operational properties of the surface layers of machine parts. Monograph. – T.: TASHSTU, 2012. - 176 p.
Other articles of the issue
