Purification, Regeneration, and Recirculation of Process Water
Authors
Dmitrii Skorobogatov

Share
Annotation
The article examines modern technologies for the purification and regeneration of water and aqueous process solutions, as well as the difficulties of comparative analysis when selecting specific technologies and materials, including composite materials, for particular applications. Special attention is paid to the significant influence of scale effects on the results of water treatment, water purification, and water regeneration operations, which must be taken into account when implementing the latest technological solutions.
The article considers the possibility of applying the operating principles of gripping devices used in specialized robotics to develop a dynamic foam generator. The proposed solution is based on introducing compressed air into a liquid (water) from a vacuum gripping device operating according to Bernoulli's principle. Initial experiments established that, owing to the thickness of the airflow, which does not exceed a few microns, adjusting the gap between the membrane and the housing makes it possible to control the diameter of air bubbles in the resulting foam.
It is shown that the ability to regulate bubble diameter is an important technical characteristic that provides flexibility and a wide range of possibilities for foam generation based on a new principle. Furthermore, experiments revealed that the load-bearing capacity of the foam produced by this method is significantly higher than that of conventional foam.
Keywords
Authors
Dmitrii Skorobogatov

Share
References:
United States Patent Application No. US 20100193445 A1. Foaming of Liquids. Published August 5, 2010.
United States Patent Application No. US 20150130091 A1. Foaming of Liquids. Published May 14, 2015.
United States Patent Application No. US 20160207013 A1. Device for Mixing Fluids. Published July 21, 2016.
United States Patent Application No. US 20100224506 A1. Process and Apparatus for Complex Treatment of Liquids. Published September 9, 2010.
United States Patent Application No. US 20100224497 A1. Device and Method for the Extraction of Metals from Liquids. Published September 9, 2010.
United States Patent Application No. US 20110056457 A1. System and Apparatus for Condensation of Liquid from Gas and Method of Collection of Liquid. Published March 10, 2011.
United States Patent Application No. US 20120102736 A1. Micro-Injector and Method of Assembly and Mounting Thereof. Published May 3, 2012.
United States Patent No. 5,871,814. Pneumatic Grip. Issued February 16, 1999.
United States Patent No. 6,139,714. Method and Apparatus for Adjusting the pH of a Liquid. Issued October 31, 2000.
